INSTRUMENT PANEL
Page : 11
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
Changing the speedo units
Note:
This function is available if the machine has done under 10 kms
The choice of distance unit (km/miles) is by pressing the control button (7) before turning on the ignition and
holding it down until the display lights up.
Unit selection is by pressing the control button (7), the arrow (8) is positioned against the unit selected and
"Engl" or "Cont" is displayed at (9)
The choice is confirmed by pressing the control button (7) for more than 2 seconds
Service function
Note
: This function is only available on Elystar 125-150 cc and if the machine has covered over 10 kms
As from 5000 kms and once this distance is exceeded, when the ignition is turned on, the message "change
oil" appears for 10 seconds in place of the clock display
This display tells the customer that his machine is due for its first service.
After servicing the machine, the service counter is reset by pressing on the control button (7) before turning
on the ignition
And so on, after every 5000 km covered, the same display is shown to remind the customer that servicing is
due (5000 kms after the previous service counter reset)
