1-800-732-2677
22
5. Check the tightness of the Receiver Collar by inserting one finger
between the end of a Contact Point and your pet’s neck. The fit
should be snug but not constricting (
2B
).
a. Allow your pet to wear the collar for several minutes then recheck the fit.
b. Check the fit again as your pet becomes more comfortable with
the Receiver Collar.
6. Trim the collar as follows (
2C
):
a. Mark the desired length of the Receiver Collar with a pen. Allow
for growth if your pet is young or grows a thick winter coat.
b. Remove the Receiver Collar from your pet and cut off the excess.
c. Before placing the Receiver Collar back onto your pet, seal the
edge of the cut collar by applying a flame along the frayed edge.
2C
