www.petsafe.net
7
• You may need to trim the hair in the area of the Contact Points. Never
shave your pet’s neck; this may lead to a rash or infection.
• Always remove your pet’s Receiver Collar before performing any
Transmitter testing.
• The Receiver Collar should not be on your pet when the system is
tested. Your pet may receive an unintended correction.
• The Boundary Zone must be tested whenever an adjustment is made
to the Transmitter setting to prevent unintended corrections to your pet.
• If you use a collar and leash for training, be sure the extra collar does
not put pressure on the contact points.
• To prevent an unintended correction, remove the Receiver Collar from
your pet when indoors.
• Never remove power from the system when the collar is on the pet.
This may activate the Receiver Collar.
• To prevent an unintended correction, after the Boundary Flags have
been placed, be sure to set the Static Correction on the Receiver
Collar back to Level 1 tone only.
