Petsafe PAW POINT PIF00-13651, Руководство по эксплуатации и обучению

Страница: 16 / 36

16 1-800-732-2677
Set the Static Correction Level
The Static Correction Level can be changed by two methods.
Set Static Correction Level Using Receiver Collar
1. Press the Receiver Collar Mode Button briefly when the unit is turned ON. The indicator light will light
red when the button is pressed.
2. Release the Mode button. The Receiver Collar will flash the red indicating the Correction Level by the
number of times the indicator flashes (See Function and Response Table below).
3. To change the Static Correction Level, press and release the Mode button within 5 seconds of the last
red flash. The Static Correction Level will then increase one level and report the new level by flashing
the number of times again. Note: set the Static Correction Level to Level 1 (tone only) for the first day of
training.
4. Repeat pressing the Mode button until the desired static correction level is achieved.
Set Static Correction Level Using BPU
1. Connect the Receiver Collar to the BPU.
2. Power on the Boundary Programming Unit.
3. From the Main Menu, use the arrow keys to navigate to System Setting | Receiver Settings.
4. Under Correction Level, choose the desired static correction level. Note: set the Static Correction Level
to Level 1 (tone only) for the first day of training.
Function and Response Table
Indicator Light Response Static Correction Level Receiver Collar Function Dog Temperament
1 Red Flash 1 No Static Correction, Tone Only Initial Training Mode
2 Red Flashes 2 Low Static Correction Timid
3 Red Flashes 3 Medium-Low Static Correction Timid or Average
4 Red Flashes 4 Medium Static Correction Average Energy
5 Red Flashes 5 Medium-High Static Correction Average or High Energy
6 Red Flashes 6 High Static Correction High Energy
Anti-Linger Prevention
The Anti-Linger Prevention feature keeps your dog from staying in the Warning Zone for long periods of
time and draining the Receiver Collar battery. Your dog will hear a two second warning tone when he reaches
the Warning Zone. If your dog does not return to the Pet Area after two seconds, he will start receiving a
continuous Static Correction until he returns to the Pet Area. Once the Static Correction has started, the
Warning Tone is disabled until your dog remains back in the Pet Area for at least 10 seconds. If he re-enters
the Warning Zone prior to the 10-second reset period, your dog will receive no Warning Tone prior to
receiving the Anti-Linger Correction.
Run-Through Prevention
This system includes a unique “run-through” prevention so that your dog cannot escape the Pet Area without
receiving an increased level of Static Correction. The Receiver Collar automatically increases the Static
Correction when your dog continues beyond the Boundary Flag Programmed points.
Over Correction Protection
If your dog leaves the Pet Area, this feature limits the Static Correction duration to 15 seconds. While
the system locks out further Static Correction, the green light will remain ON for 10 seconds. The Static
Correction will remain locked out until your pet has remained back in the Pet Area for at least 10 seconds.