14
+1 (800) 732-2677
petsafe.com 15
4. The Receiver Collar should fit
snugly, yet loose enough to
allow one finger to fit between a
contact point and your pet’s neck
(
G
). Allow your pet to wear the
collar for several minutes then
recheck the fit. Check the fit
again as your pet becomes more
comfortable with the Receiver
Collar.
5. Once you are satisfied with the
fit of the Receiver Collar then you
may trim any excess collar strap
as follows (
H
):
a. Mark the desired length of
G
H
the Receiver Collar with a pen. Allow for growth if your pet is
young or grows a thick winter coat.
b. Remove the Receiver Collar from your pet and cut off the excess.
c. Before placing the Receiver Collar back onto your pet, seal the
edge of the cut collar by applying a flame along the frayed edge.
To Re-Thread the Collar
Slide Buckle
Ridges
The slide buckle prevents the
collar from becoming loose
around your pet’s neck.
The ridges must be facing
up; the collar will slip if it is
not properly threaded.
