8
+1 (800) 732-2677
petsafe.com 9
Use the edge of the Test Light Tool to turn the battery clockwise until the
arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise using the edge
of the Test Light Tool (
C
). DO NOT attempt to cut into or pry open the
battery. Be sure to discard the used battery properly. Battery life will vary
depending on how often your pet tests the system and receives a Static
Correction. Check the Receiver Collar every month to ensure the battery
is working properly.
If the Receiver LED Indicator Light is flashing every 4 to 5 seconds, battery
replacement is required. Remove the old battery from the Receiver Collar.
Discharge all power by holding the correction level button down until the
LED is no longer illuminated. Replace with a new battery.
A replacement PetSafe
®
battery (RFA-67) can be found at many retailers.
Contact the Customer Care Center or visit our web site at petsafe.com to
locate a retailer near you.
Operating Guide
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact
Points. Long Contact Points for pets with long or
thick hair are available through our Customer Care
Center. Tighten the Contact Points using Test Light
Tool (
A
) one-half turn beyond finger tight. Check
the tightness weekly.
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver
Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe
®
battery (RFA-67). This unique battery is designed
to make battery replacement easier and increase
water protection.
To insert the battery, align the symbols on the
battery (arrow) and Receiver Collar (triangle) (
B
).
A
B
C
