16
+1 (800) 732-2677
petsafe.com 17
Taking Your Pet Out of the Pet Area
Important: Remove the Receiver Collar and leave it in the Pet Area.
Once your pet learns the Boundary Zone, he will
be reluctant to cross it for walks or car rides.
Option 1:
Replace the Receiver Collar with a
regular collar. Put your pet in a car that is within
the Pet Area and drive him out of the Pet Area.
Option 2:
Replace the Receiver Collar with a
regular collar and leash. Walk your pet out of the
Pet Area while giving a command such as “OK”
at a specific place of the Boundary Zone (the end
of your driveway, sidewalk, etc.). Always leave the
Pet Area with a leash at this place and your pet
will associate leaving the Pet Area only on a leash, only at this place, and
only with a person. You may initially need to convince your pet to leave
the Pet Area with a food treat and lots of praise.
Note: You may also carry your pet out of the Pet Area.
Please refer to your PetSafe
®
In-Ground Fence
™
product manual for a
complete list of Troubleshooting or visit petsafe.com.
Troubleshooting
Receiver Collar
is not beeping or
correcting.
• Check battery to make sure it is installed properly.
• Check that both lights are lit on the Fence
Transmitter. Refer to In-Ground Fence
™
Operating
and Training Guide.
The Receiver
Collar is beeping,
but the pet is not
responding to the
Static Correction.
• Test the Receiver Collar with the Test Light walking
toward the Boundary Wire.
• If the Test Light flashes, check the fit of the
Receiver Collar.
• Trim your pet’s fur where the Contact Points touch
the neck and/or purchase longer Contact Points by
contacting the Customer Care Center.
• Increase the Static Correction Level.
• Repeat training steps to reinforce training.
• Purchase a stronger Receiver Collar by contacting the
Customer Care Center.
