PETIT auto wash Accutrac 360-t, Руководство по установке

Страница: 23 / 32

Petit Auto Wash Inc.
360-t Installation Manual www.PetitAutoWash.com P a g e | 23
Accutrac 360-t Tunnel
2.4. Air Solenoid Valve Manifold:
Mount the Air Solenoid Sub-assembly close to the Control Panel. Feed the Pressure Regulator with a
3/8’ airline @ 100psi. Set the pressure regulator to 70 - 85 psi.
Wire the two solenoids into the Control Panel. Terminate the Brown wires on the appropriate Output
relay, and the Blue wires to 24VAC Common.
Route the quad airline to the Air Solenoids as shown:
Solenoid 0010 (Rotate to Front of car) Solenoid 0011 (Rotate to Rear of car)
Top Blue Black
Bottom Clear Translucent Blue
Note that the energy chain is supplied with approximately 50ft of ¼” quad tubing that extends beyond
the e- chain bulkhead. If you need to add additional length to the tubing, use ¼” poly tubing. Adding
additional quad tubing will cause excessive line resistance and pressure loss.