10
1
Standby
The Standby key
switches the preamplifier
between On and Standby
mode.
2
Source Up & Down
The Source keys scroll
through the source
inputs.
3
Volume Up & Down
The Volume keys adjust
the volume level of the
preamplifier.
Note:
When the Output
Level Switch is set to
‘Fixed’, the volume keys
have no effect.
Note:
When Aux2 input
is selected and the Aux2
Function Switch is set to
‘HT’, the volume control
will have no effect on
the volume level of the
preamplifier outputs.
Operation - Remote Control
4
Display
The Display key adjusts
the display options,
scrolling through
FULL, MEDIUM and
LOW brightness and
display OFF, although
the Standby LED will
remain on at a reduced
brightness. If the
display is set to OFF,
the display will turn
on when the source
input is changed then
automatically turn off.
5
Mute
The Mute key causes
the volume level to
be muted. The mute
mode is indicated by
the selected input LED
flashing gradually. Press
again, or increase the
volume, to cancel mute.
6
Direct Source Keys
The Direct Source Keys
provide direct selection
of source inputs.
