11
Care and Maintenance
The DP32 has been designed to provide many years of trouble free enjoyment. It is important to keep the
exterior of the unit clean.
Notes:
Always switch the unit off and remove the power cord from the rear of the unit before attempting to
clean your Audiant DP32 DAC Preamplifier in the manner described below.
Never apply liquid directly to the unit.
Never use abrasives.
Never rub in a circular motion.
Front Panel and Cover
The front panel and cover feature a durable, high-quality anodised finish. To remove finger marks and dirt,
simply rub the surface with a soft cloth.
If the dirt is not removed, use a small quantity of isopropyl alcohol on a clean cloth and rework the effected area.
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
Check the mains fuse of the unit.
Check fuse in the mains plug or adaptor.
There is no sound
Check that the source component is properly connected.
Check that the source component is playing.
Make sure the unit is not muted.
There is no sound on one channel
Check interconnects.
There is a loud buzz or hum
Ensure no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the amplifier.
Unable to make or play tape recordings
Check Line Out has been connected properly.
The remote handset will not function
Check the batteries have not expired.
Check the batteries are inserted in the correct orientation.
Ensure that nothing is blocking the remote sensor.
