PERODUA ALZA, Руководство пользователя

Страница: 376 / 508

7–12
Step 3: Auto answering and manual answering selection
1. The audio system allows the selection of “Auto Answering” and “Manual Answering” by just press the Bluetooth button for
about 3 to 6 seconds until 2 beep sound heard.
2. The sequence of selection is shown as below:
Remark: The Auto Answering & Manual Answering selection is effective only for after the audio system is connected to the Bluetooth mobile.
Step 4: When there is an incoming call or outgoing call
1. At standby mode (Manual Answering), if there is an incoming call, the audio output will be cut-off
automatically. The incoming call can only be accepted if Bluetooth button is pressed for once. The
receiving conversation can be heard from front right speaker.
2. At standby mode (Auto-Answering), if there is an incoming call, the audio output will be cut-off
automatically. The incoming call can be accepted automatically without pressing the Bluetooth
button.
3. The volume level of telephone conversation can be adjusted by pressing the volume up [ ] or
volume down [ ] button (Figure 4).
Step 5: Ending a call
1. User can choose to terminate the call by pressing bluetooth button for 1 second, the audio output system will resume
immediately after ending a call. Consequently, the communication mode is change to Standby mode.
Step 6: Reject incoming call
1. Press the Bluetooth button twice at once to reject an incoming call.
Press Bluetooth button
for 2 seconds until
2 beep sound heard
Press Bluetooth button
for 2 seconds until
2 beep sound heard
Auto Answering
Manual Answering
-System LCD display “AUTO ANS”
-System LCD display “MANU ANS”
Figure 4
Volume down
Volume up
Sect 07 EN.indd 12 09/07/2018 11:53 AM