Permobil BodiLink Lateral Trunk Support, Руководство по эксплуатации

Страница: 15 / 80

BodiLink Lateral Trunk Support Operation Manual
13
INSTALLATION - GT2 SLOT MOUNT ON ACTA-RELIEF
Attaching GT2 Slot Mount Hardware to Acta-Relief Back Supports.
1 Using the 4mm hex key, release the bolts (A) and the safety washers (B) from
the slot lock bracket (C).
2 With the flat face of the slot mount link (D) on the outside surface of the back
support shell (E) and the bolts (F) facing up, align the slot lock bracket halves
with the slot on the back support shell (E). The threaded half of slot lock
bracket (C) should be placed on the inside of the back support shell (E). Order
of installation: bolts (A), safety washers (B), slot lock bracket (half with through
holes) (C), slot mount link (D), back support shell (E), slot lock bracket (half with
threaded holes) (C).
3 Tighten the bolts (A) to secure, and replace the back support cover. Continue
to the “Adjustment and Use” section for final hardware adjustments and pad
positioning.
A
B
C
F
D
Swing-Away Hardware without Pad
C
B
A
C
E