Column Refrigeration Service Manual
102
8.15 Drawer Compartment Dividers
To remove the drawer compartment dividers
(insulated dividers between each drawer):
1.
Locate the two retaining pins on the left and
right sides approximately 2/3 back on the
divider extrusions.
2.
Remove the two retaining pins by prying up
using a flat blade screwdriver (protect material
surfaces to avoid scratches) and then pulling
the pins out.
3.
Pull forward on the divider and disconnect the
light electrical connection.
4.
Pull the divider out of the cabinet.
To install:
1.
Slide divider into cabinet extrusion
2.
Make light electrical connection
3.
Manage excess wire and slide divider in until
completely inserted.
4.
Install the two retaining pins.
Figure 8-16 - Drawer Compartment Divider
And Retaining Pin
Содержание CC24D Series
Страница 116: ...Column Refrigeration Service Manual Return to Table of Contents 116 8 22 Trim Kits Figure 8 25 Trim Kit ...
Страница 119: ...Column Refrigeration Service Manual Return to Table of Contents 119 9 3 CR24F Drawers Figure 9 3 CR24F Drawers ...
Страница 120: ...Column Refrigeration Service Manual Return to Table of Contents 120 9 4 CR24R Shelving Figure 9 4 CR24R Shelving ...
Страница 121: ...Column Refrigeration Service Manual Return to Table of Contents 121 9 5 CR30R Shelving Figure 9 5 CR30R Shelving ...