SPEED Serial adaptors User guide
SCO UnixWare
Page 103
SCO UnixWare
There are no messages displayed on the system at startup. Messages from the SPEED
driver are sent to the
syslog
file in the /var/adm directory. Each entry in the
syslog
file is
date and time stamped (You can review the content of the syslog file using a suitable text
editor). Each time the driver is loaded, entries similar to those shown below indicate
successful SPEED card detection.
Apr 26 16:05:15 pwredge3 unix: Speed Unixware Driver v1.0.0 Apr 26 2000 15:56:35
Apr 26 16:05:15 pwredge3 unix: Copyright (c) 2000 Perle Systems Ltd
Apr 26 16:05:15 pwredge3 unix:
unit:0 - Speed4 card @0xFDFF9000 using IRQ:10 - OK
Apr 26 16:05:15 pwredge3 unix:
unit:1 - card @0xFDFFD000 using IRQ:15 - OK
Apr 26 16:05:15 pwredge3 unix:
Total Speed Ports : 8
Apr 26 16:05:15 pwredge3 unix:
unit:1 - card @0xFDFFD000 using IRQ:15 - OK
Driver software version
Total number of SPEED ports
Driver message - always displayed if installed and configured
Host card type
Host card base address in hexidecimal
Host card ID number
IRQ level
Содержание SPEED Series
Страница 16: ...SPEED Serial adaptors User guide About the SPEED serial adaptor card Page 16 Chapter 1 Introduction ...
Страница 74: ...SPEED Serial adaptors User guide Removing host cards Page 74 Chapter 2 Installing drivers and host cards ...
Страница 86: ...SPEED Serial adaptors User guide SPEED cables available from Perle Page 86 Chapter 3 SPEED Cabling information ...
