SPEED Serial adaptors User guide
Installing under Linux
Page 71
Chapter 2 Installing drivers and host cards
4. If you require callout devices as well as tty devices, at the command prompt, type
ls -l /
dev/cua[0-9]*
and press the
Enter
key to determine the major and minor node numbers
for callout devices.
The major and minor node numbers are now displayed as shown in the next example.
5. At the command prompt, type the following (pressing the
Enter
key after each one):
Your system can now use the SPEED serial adaptor cards you have installed.
crw-rw-rw- 1 root tty 4, 64 May 5 1998 /dev/cua0
crw------- 1 root tty 4, 65 Nov 12 14:12 /dev/cua1
mknod /dev/cua2 c 5 66
mknod /dev/cua3 c 5 67
mknod /dev/cua4 c 5 68
mknod /dev/cua5 c 5 69
Same as that for
/dev/cua0
Uses next available number
Содержание SPEED Series
Страница 16: ...SPEED Serial adaptors User guide About the SPEED serial adaptor card Page 16 Chapter 1 Introduction ...
Страница 74: ...SPEED Serial adaptors User guide Removing host cards Page 74 Chapter 2 Installing drivers and host cards ...
Страница 86: ...SPEED Serial adaptors User guide SPEED cables available from Perle Page 86 Chapter 3 SPEED Cabling information ...
