Perle SPEED Series, Руководство пользователя

Страница: 51 / 122

SPEED Serial adaptors User guide
Installing under Windows 95 and 98
Page 51
Chapter 2 Installing drivers and host cards
General installation procedure for Windows 95 and 98
The general procedure for installing and configuring host cards, drivers software and
associated utilities for the Windows 95 and 98 operating systems is as follows:
1. Down load the SPEED driver files into your PC from the CDROM or the Perle website.
See Down loading SPEED drivers from the Perle web site on page 19 .
2. Install any PCI host cards you require into your system. See Installing a PCI host
card on page 72 .
3. Install the SPEED Windows 95 and 98 drivers and utilities onto your system using the
procedures described in Installing device drivers and utilities on page 52 .
4. If required, remove any host cards you want from your system. See Removing host
cards on page 73 .
Your system can now use the serial adaptor cards you have installed. If required, you can
reconfigure serial ports following initial installation. See
Configuring SPEED serial ports on
page 54 .
Note
To remove the SPEED Windows 95 and 98 drivers and utilities from your system, see
page 58 .