Perkins WK 1300 Series EDi, Руководство пользователя, Страница: 28 / 40

4
24 User’s Handbook, TPD 1352E, issue 4
1300 Series EDi Models WK to WS
How to eliminate air from the fuel system
If air enters the fuel system, it must be eliminated before the engine can be started.
Air can enter the system if:
z
The fuel tank is drained during normal operation.
z
The low-pressure fuel pipes are disconnected.
z
A part of the low-pressure fuel system leaks during engine operation.
In order to eliminate air from the fuel system, proceed as follows:
1 Loosen the vent plug (A1) on the top of the fuel filter head.
2 Operate the plunger of the fuel priming pump (A2) until fuel, free from air, comes from the filter vent point.
Tighten the vent plug.
3 Turn the start key to the "ON" position.
4 Operate the starter motor for intervals of 15 seconds until the engine starts. If the engine runs correctly for
a short time and then stops or runs roughly, check for air in the fuel system. If there is air in the fuel system,
there is probably a leakage in the low pressure system. Turn the start key to the "OFF" position to stop the
engine. Rectify the leakage and repeat the procedure.
W011/1
A
1
2