Perkins 402F-05 Скачать руководство пользователя страница 6

Страница: 6 / 88

Illustration 2

g03378379

Typical examples

(A) Location of warning label
(1) 402F-05

(2) 403F-07
(3) 403F-11

(4) 403F-15

i02328435

General Hazard Information

Illustration 3

g00104545

Attach a

“

Do Not Operate

”

warning tag or a similar

warning tag to the start switch or to the controls
before you service the equipment or before you repair
the equipment.

Illustration 4

g00702020

Wear a hard hat, protective glasses, and other
protective equipment, as required.

Do not wear loose clothing or jewelry that can snag
on controls or on other parts of the engine.

Make sure that all protective guards and all covers
are secured in place on the engine.

Keep the engine free from foreign material. Remove
debris, oil, tools, and other items from the deck, from

walkways, and from steps.

SEBU9064

Safety Section
General Hazard Information

Содержание 402F-05
























































































Результаты поиска

Содержание 402F-05

Отзывы:

Perkins 402F-05, Руководство по эксплуатации и обслуживанию, Страница: 6 / 88

Результаты поиска

Содержание 402F-05

Отзывы: