Perkins 402F-05 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 88

Perkins 402F-05 Скачать руководство пользователя страница 23

NOTICE

The Engine Monitoring System is not a guarantee
against catastrophic failures. Programmed delays
and derate schedules are designed to minimize false
alarms and provide time for the operator to stop the
engine.

The following parameters are monitored:

• Coolant temperature

• Oil pressure

• Engine speed

• Atmospheric pressure (Barometric pressure)

The coolant temperature, oil pressure, and the engine
speed can trigger an engine shutdown.

• Atmospheric pressure (Barometric pressure) can

trigger an engine de-rate.

The atmospheric pressure sensor (Barometric
pressure sensor) can de-rate the engine. Operating
the engine and increasing the altitude will de-rate the
engine in accordance with emission regulations. The
start of the de-rate will be determined by the flash file
that is installed.

i05336156

Overspeed

• 402F-05

3600 Revolutions Per Minute

(RPM)

• 403F-07

3600 RPM

• 403F-11

3600 RPM

• 403F-15

3000 RPM

The overspeed is plus 700 RPM above the given
speed for engines shown.

i05336173

Sensors and Electrical
Components

The following sensors or switches are installed on the
402F-05, 403F-07, 403F-11, and the 403F-15

engines:

• Oil pressure sensor

• Coolant temperature sensor

• Atmospheric pressure sensor (Barometric

pressure sensor)

• Speed sensor

• Throttle actuator

SEBU9064

23

Features and Controls

Overspeed

«
...
21
22
23
24
25
...
»

Содержание 402F-05

























































































Отзывы:

Нет отзывов