PerkinElmer Lambda 365 Peltier Temp Ctrl Unit Multi, Руководство по установке

Страница: 32 / 42

09931463A
32
a. Start Temp (°C) : The starting temperature of experiment.
b. SP Temp (°C) : The set temperature to go to the next measurement temp.
c. Block Temp (°C) : The temperature of Cell Block.
d. Probe 1 Temp (°C) : The temperature of Probe 1.
e. Probe 2 Temp (°C) : The temperature of Probe 2.
f. Monitor : Selected temperature is being monitored.
g. Error Range (°C) :
It shows the temperature tolerance between the sampling and monitored temperature. The
measurement will start when the temperature tolerance reaches within the set Error
Range.
h. Hold Time : It shows the set holding time.
i. Elapsed Time (s) : It shows the elapsed time to reach the sampling temperature.
j. Status : It shows the status of experimental progress.
12. Remove blank solution from sample cell holder and insert sample solution into the sample cell holder.
Select
Sample , then the measurement will be started after the temperature reached the target
temperature.
NOTE:
To pull out the cell easily, use the cell lifting knob.
13. After the measurement is finished, the results are displayed in the result window. Save or print
results as required.