PeriBest Pumps I12, Руководство пользователя

Страница: 7 / 29

MANUAL PERIBEST I12 – I17 – I21
7 | 29
Safety instructions
Live parts
· The device must be disconnected from the power supply before it
is opened
· Isolate damaged faulty or manipulated devices from the mains in
order to de-energise.
Emergency stop switch
An emergency stop switch is to be connected for the entire plant.
This should enable the entire plant to be shut down in the event of
an emergency in such a way that the overall plant can be brought
into a safe condition.
Unauthorized access
Ensure that there can be no unauthorized access to the unit.
Hazardous media/contamination of persons and equipment
· Ensure that the pump hoses are resistant against the media being
conveyed
· Always observe the safety data sheets for the media to be
conveyed. The system operator must ensure that these safety data
sheets are available and that they are kept up-to-date.
· The safety data sheets for the media being conveyed are always
decisive for initiating countermeasures in the event of leakage to the
media being conveyed.
· Observe the general restrictions in relation to viscosity limits,
chemical resistance and density.
· Always switch the pump off before exchanging the pump hose
· In case of corrosive liquids or high temperature liquids, is
necessary to control the leakage using hose leakage sensor or other
external devices.
Correct and proper use
· The unit is not intended to convey or regulate gases or solid media
· Do not exceed the rated pressure, speed or temperature for the
pump
· The unit may only be used in accordance with the technical data
and specifications provided in these operating instructions and in
the operating instructions for the individual components
· The system is not designed for use in areas of risk from explosion
· Only switch the pump on if it has been properly fastened to the
floor
· Only switch the pump on if it the front cover has been attached.