Peri 135413, Сборка, пусконаладка и техническое обслуживание, запасные части и схемы электрических цепей, Страница: 9 / 74

9
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
Introduction
Safety instructions
General
Deviations from the standard configura-
tion and/or intended use present a po-
tential safety risk.
When using our products, all coun-
try-specific laws, standards and other
safety regulations shall be observed.
In the case of unfavourable weather
conditions, suitable precautions and
measures are to be implemented in or-
der to guarantee working safety and
stability.
The contractor (user) must ensure sta-
bility during all stages of construction.
They must ensure and provide evi-
dence that all loads that occur are
transferred safely.
The contractor (user) must provide safe
working areas for site personnel, which
are to be reached via safe access
routes. Areas of risk must be cordoned
off and clearly marked. Hatches and
openings to accessible working areas
must be kept closed during working op-
erations.
To facilitate understanding, detailed il-
lustrations are sometimes incomplete.
The safety installations which have pos-
sibly not been shown in these detailed
illustrations must nevertheless be avail-
able.
Storage and transportation
Do not drop the components.
Store and transport components in
such a way that no unintentional
change in their position is possible. De-
tach lifting gear from the lowered units
only if an unintentional change in their
position is no longer possible.
During movement procedures ensure
that components are picked up and set
down in such a way that unintentional
falling over, falling apart, sliding or roll-
ing is prevented.
Use suitable load-carrying equipment
to move the components and always
use the designated load-bearing points
on the components.
During the lifting and moving proce-
dure, ensure that all loose parts are re-
moved or secured.
When moving components, always use
a guide rope.
Move components on clean, flat and
sufficiently load-bearing surfaces only.
PERI products must be stored in such a
way that they are protected against the
effects of the weather and aggressive
materials if safety is then likely to be af-
fected.
Transport routes must be non-slip, lev-
el, free of obstacles and must have a
sufficient load-bearing capacity.
Product-specific
Safety instructions apply to all ser-
vice life phases of the system.
Appropriate personal protective equip-
ment must be worn (PPE) for activities,
e. g.:
■
Safety helmet
■
Safety shoes
■
Safety gloves
Reliable lightning conduction and fire
protection must be ensured.
Working areas must be adequately lit
during all service life phases.
Operation
The contractor must ensure that as-
sembly, modifications and dismantling,
as well as the use and handling of the
product, are managed and supervised
by qualified and authorised personnel.
All persons working with the prod-
uct must be familiar with the operat-
ing instructions and safety informa-
tion.
The contractor must ensure that the
Assembly Instructions, the Instructions
for Assembly and Use, other instruc-
tions required for operations or assem-
bly, relevant planning documents, parts
lists and other information are available
to users.