Peri 135413, Сборка, пусконаладка и техническое обслуживание, запасные части и схемы электрических цепей, Страница: 50 / 74

50
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D7 Remedial measures for malfunctions
Extending the cylinders to the
same height
Unequal ballasting on the climbing
units can result in a lateral offset. In
rare cases, this could negatively affect
the “inserting” of the RCS Rails in the
next climbing shoe. This deviation can
be corrected even if the pistons have
not been completely extended.
1. Press the “Operation Mode” button
(
3.17
) until the button flashes orange.
→
Single-mode operation is activated.
2. Select the climbing device using the
“Cylinder 2 On/Off” button (
3.20
) and
“Cylinder 1 On/Off” (
3.22
) button.
→
The selected cylinder lights up or-
ange.
2. Extend the climbing device to the
same height by:
– pressing the “Cylinder Extend”
button on the keypad.
or
– pressing the “Cylinder Extend”
button on the connected remote
control.
4. Press the “Operation Mode” button
( 3.17 ) until the button lights up
green.
→
Interlink-mode operation is activat-
ed.
Fig. D7.03
3.17
3.20 3.22