Peri 135413, Сборка, пусконаладка и техническое обслуживание, запасные части и схемы электрических цепей, Страница: 23 / 74

23
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
B2 Packaging
Pallett RP Hydrau-
lic Pump RCS MAX
■
When putting two Hydrau-
lic Units RCS MAX into storage,
always position them diagonally.
■
Storage areas and transport routes
must be non-slip, level, free of obsta-
cles and must have a sufficient
load-bearing capacity.
■
Additional safety measures may be
necessary during transportation.
■
Place Hydraulic Units RCS MAX in
the pallet with the keypad pointing
outwards.
Max. load-bearing capacity = 4 units
Crane sling angle ≤ 30 °
→
Four-sling lifting gear L ≥ 1.5 m
(Fig. B2.05a)
Stacking heights
■
Individual pallet:
– Transport using a truck, pallet lift-
ing trolley, forklift truck or crane
■
Stacking height of max. 2 pallets:
– Storage on the construction site
with a base that is inclined by no
more than 3% and working wind
load.
– Storage in rental warehouse/build-
ing yard with a base that is inclined
by no more than 2% and working
wind load.
– Transportation by truck or forklift
truck.
■
Stacking height of max. 4 pallets:
– Storage in the hall on level base.
– No wind permitted.
Filling
1. Open and fold in the metal clip.
2. Attach the Hydraulic Units RCS MAX
to the crane and move them onto the
earmarked positions on the pallet.
3. Close the metal clip and secure with
a cotter pin.
(Fig. B2.04 + B2.05)
30°
Fig. B2.05
Fig. B2.05a
Fig. B2.04
Fig. B2.03