Peri 117465, Перевод оригинальной инструкции по эксплуатации

Страница: 35 / 46

33
m
ax
. 1
0 m
m
2.4f
Application
Hydraulic Head Spindle Device VST
Translation of the Original Instructions for Use
Procedure
1. Drain the hydraulic cylinder (2.1) by
turning the drain valve (2.4b) coun-
ter-clockwise.
2. Close drain valve.
3. Turn spindle sleeve (1.4) with Mount-
ing Shaft VST (1.5) 13 mm over top
edge of the hydraulic cylinder. (Fig. 24)
4. Raise hydraulic cylinder by means of
pump lever (2.4f) until spindle nut is
relieved.
5. Turn spindle nut (1.3) with Mounting
Shaft VST clockwise by 10 mm.
(Fig. 25)
6. Open drain valve (2.4b) and drain the
hydraulic cylinder.
g  Lower head spindle, spindle sleeve
and spindle nut.
7. Turn spindle nut (1.3) with Mounting
Shaft VST in a clockwise direction until
the spindle nut rests on the head plate.
(Fig. 26)
g  Hydraulic cylinder is relieved.
8. Repeat action steps 1 to 7 until
the load has been lowered, see
project-specific statics.
Fig. 26
2.4b 2.1
1.4a
1.4
1.3
Fig. 25
Fig. 24
13
m
m
EN_BA_Hydr_Kopfspindeleinheit_VST.indb 33 01.04.16 11:25