Peri 117465, Перевод оригинальной инструкции по эксплуатации

Страница: 18 / 46

16
Introduction
Hydraulic Head Spindle Device VST
Translation of the Original Instructions for Use
Care and maintenance instructions
General
The Hydraulic Head Spindle Device VST
is designed for long-term use on con-
struction sites.
In order to ensure a cost-effective, tech-
nically sound and safe use over a long
period, it is important to take a value-pre-
serving approach.
Repairs to the Head Spindle VST 100
which require welding, or rectifying
deformation of components, can only be
carried out by PERI.
If corrective maintenance or the replace-
ment of worn components is required,
only PERI original parts are to be used as
spare parts.
Clean the Head Spindle VST 100 before
and after every use, and grease the me-
chanical components with an appropriate
lubricant (Long-Life Grease LT 200 EP or
equivalent).
Maintenance and repair work on the Hy-
draulic Unit VST is to be carried out only
at an authorized customer service centre
in the respective region. Only original
components may be used.
Drain all of the hydraulic oil every 12
months and re-fill the pump with the
original oil, HF-95Y or similar. Carry out
the oil change more often if the hydraulic
system is used in dirty environments.
Check the hydraulic oil level of the Hy-
draulic Unit VST before every use and
top up if necessary.
Regularly check the manometer to en-
sure its accuracy. Critical pressure meas-
urements, malfunction or failure of the
manometer, or inaccurate measure-
ments represent a safety risk.
EN_BA_Hydr_Kopfspindeleinheit_VST.indb 16 01.04.16 11:25