Peri 117465, Перевод оригинальной инструкции по эксплуатации

Страница: 33 / 46

31
Application
Hydraulic Head Spindle Device VST
Translation of the Original Instructions for Use
Procedure
1. Drain the hydraulic cylinder (2.1) by
turning the drain valve (2.4b) coun-
ter-clockwise.
2. Close drain valve.
3. Insert the Mounting Shaft VST (1.5)
into a bore (1.4a) of the spindle sleeve
(1.4).
4. Turn spindle sleeve with Mounting
Shaft VST downwards until spindle
sleeve rests on hydraulic cylinder.
(Fig. 21)
5. Raise hydraulic cylinder max. 10 mm
with the pump handle (2.4f). (Fig. 22)
g  Raise Head Spindle and spindle
sleeve.
6. Turn spindle nut (1.3) with Mounting
Shaft VST in a clockwise direction until
the spindle nut rests on the head
plate.
7. Open drain valve and drain the hydrau-
lic cylinder. (Fig. 23)
g  Spindle nut is relieved.
8. Repeat action steps 2 to 7 until the re-
quired height is reached.
9. Observe inspection holes (1.8) and
maintain max. spindling height.
(Fig. 20)
Fig. 23
m
ax
. 1
0 m
m
m
ax
. 4
57 m
m
2.4f
2.4b
2.1
1.4a
1.4
1.5
Fig. 22
Fig. 21
EN_BA_Hydr_Kopfspindeleinheit_VST.indb 31 01.04.16 11:25