PARTS BREAKDOWN BY BOX
(Continued)
7
INDOOR UNIT
OUTDOOR UNIT
Line Set
MZ Quick Connect Accessory Kit (MZQCACC-KIT)
• 1x Indoor Evaporator Unit
• 1x Mounting B Template
Note: Mounting Bracket comes
attached to indoor unit.
• 1x Optional Extra Foam Insulation
(For Insulating Valve Connections)
• 1x Drain Joint
• 1x Drain Joint Rubber Seal
• 4x Flare Nuts
(For flared type Installations)
• 1x Bag of Wall Anchors & Screws
• 1x Remote Control Wall Bracket
• 1x Remote Control
• 1x Waterproof Cord Connector
• 1x FA09 Quick Connect Adaptor
(Only included with 18K BTU,
use FA09 adapter instead of FA12)
• 1x Outdoor Unit
• 4x Outdoor Unit Anti-Vibration
Pads (May or may not be factory
installed)
• 1x Switch Tie
(Only used with flared connections
& 24K outdoor unit)
• 1x 25 ft. Line Set
(with quick connect fittings
installed)
• 2x Male Condenser Couplers
• 2x Vinyl Wrap
• 1x Wall Collar
• 1x Drain Tube (15 ft. / 4.5 m)
• 1x Duct Seal
NOTE:
• 18K and 24K units will have rubber pads on the
feet (factory installed)
• 24K outdoor unit will have 1 switch tie included
for 18K unit indoor unit; This is only used for flare
type connections.
