IC-03.1 Card Capture Reader
3
Dear Customers!
Thank you for choosing a card captures reader manufactured by PERCo.
By making this choice, you have purchased a high-quality product, which will serve
you for years to come if you follow installation and operation recommendations.
The Assembly and Operation Manual (hereinafter – the Manual)
contains information on
transportation, storage, installation and operation of the
IC-03.1 card capture reader
(hereinafter – the card capture reader). The installation must be carried out by qualified
installers in strict accordance with the Manual.
Abbreviations adopted in the
Manual:
ACS – access control system;
OD – operating device.
1 APPLICATION
The
IC-03.1
card capture reader is designed to operate within an ACS as a device for
reading, capturing and keeping proximity cards issued to visitors and meant for return at
exit (hereinafter – guest cards).
The card capture reader operates together with a controller and an OD – a turnstile or a
wicket gate.
To ensure quick and easy passage of people it is recommended to install one card capture
reader together with an OD for every 500 people.
Note:
Built-in card reader provide code reading from Proximity identifiers with operation
frequency 125 kHz produced by HID Corporation type ProxCard II, ISOProx II,
trinkets ProxKey II (standard formats HID: 26 bit (H10301), 37 bit (H10302,
H10304)), and the production of EM-Microelectronic-Marin SA.
2 OPERATION CONDITIONS
The card capture reader with regard to resistance to environmental exposure, complies
with GOST 15150-69, category U4 (operation in premises with climate control).
Operation of the card capture reader is allowed at an ambient air temperature from +1°C
to +45°C and relative air humidity up to 70% at +27°C.
