PERCo CL-05.2, Руководство по эксплуатации, Страница: 34 / 42

CL-05.2 Web-interface
2. Click in the working area of the page on the line with OD “Lock #1”. The control window
with selected OD will be opened:
3. Using the buttons at the bottom part of the window, give the necessary command. The
control window will be closed; the command will be passed to the controller. To close
the window without submitting command is possible with the
“Close” button .
Note:
When you unlock the OD will be unblocked for the time chosen in the drop-down
list
“Unlock time” .
6. ACCESS CARDS
6.1 Entering of the cards identifiers
To enter the card identifiers:
1. Click consistently in the Web-interface menu: “Access cards” → “Enter” . The page
with working area will be opened:
2. If necessary, use the dropdown list in the heading of the “Number type” column,
select the format to display the cards identifiers.
Note:
The display format is not the format of reading of the card identifiers (set in the
“Configuration” section, Clause 4.2.4), when you change the display format, the
format of reading does not change.
3. Entering of the card identifiers from the reader:

In the working area of the page click the “Switch on card reader input” button.

Present your card to one of the readers included in the controller configuration. The
card identifier will appear in the working area of the page. Also, you will see the
buttons
“Save” and “Load to emergency list”.
33