PERCo CL-05.2, Руководство по эксплуатации, Страница: 28 / 42

CL-05.2 Web-interface
3. SETTING
3.1 Change of network setting of the controller
The controller has following configurations by default (they are specified in the certificate of
the device and on the labels on the controller):

MAC-address
00-25-0B-xx-xx-xx
, where
xx
– is a number from
00
to
FE
;

IP-address
10.x.x.x
, where
x
– – is a number from 0 to 254;

Subnet mask
255.0.0.0
.
To change network settings of the controller (only in user mode, Section 5.5 of Operation
manual):
1. Click consistently in the Web-interface menu: “Settings” → “Network” . The page
with working area will be opened:
2. In the input fields “IP-address:” , “Mask:” , “Gateway:” the new values of network
Settings of the controller.
3. Click “Save” button. New network settings will be saved in the controller.
3.2 Setting of the access password of the controller
By default, access password of the controller is not specified. To change or set the new
password:
1. Click in the Web-interface menu: “Settings” → “Password” . The page with working
area will be opened:
2. In the “New password:” field enter the new password of the controller, in the
“Confirm password:” field enter the password again to confirm the correct input.
3. Click the “Save” button. The new password will be saved in the controller.
3.3 Change the system time of the controller
To change the time:
1. Click in the Web-interface menu: “Settings” → “Time” . The page with working area
will be opened:
27