WHA-GW-*
Operation
22
1981
2011
-0
7
77
6.3.4
Set device address
The table in the
Set device address
window shows the
Wireless
HART devices in the
network. The device address is the device long tag stored in the device.
Figure 6.11Additional Functions > Set device address
Changing the device address
1. Place the cursor inside a cell of the
Long Tag
column.
2. Change the device long tag as required. You may change the long tags of several
devices at once, if needed.
3. To apply the new DTM address(es) press
Update changed tags
.
The new DTM addresses are stored to the devices.
Note!
Additional functions > Set device address
is available only online (connection to the
gateway and the
Wireless
HART device(s) active).
Note!
The Device Long Tag parameterized in the
Set Device Address
window must be identical
with the Device Long Tag of the same device parameterized in the
Set DTM Address
window (see chapter 6.3.3). Otherwise the DTM is not able to establish a connection to the
device.
