Pepperl+Fuchs WCS-PNG410, Руководство пользователя

Страница: 18 / 39

2
0
2
0
-0
3
16
WCS-PNG410
Commissioning
Connecting the WCS Read Head
1.
Connect the voltage supply for the WCS read head to terminals 1 and 2 of the 4-pin plug X2 on
the interface module.
2.
Connect the RS-485 data cable to the WCS read head on terminals 4 and 5 of plug X1.
Activating the RS-485 Bus Termination
If the interface module is operated as the first or last physical device in an RS-485 bus or if you
operate one read head on the interface module, a bus termination must be performed on this
interface module.
Figure 4.1 RS-485 bus termination
Set the T2 slide switch (1) to "On" to activate the bus termination (150

).
Note
The T1 slide switch (2) has no function and remains in the "Off" switch
position.
1 2