Pepperl+Fuchs VisuNet GXP Series, Руководство пользователя, Страница: 34 / 56

2
0
2
0
-0
4
34
VisuNet GXP
Mechanical Installation
Mounting the Scanner Holder
1.
Open the AG1 housing. See chapter 3.3.5
2.
Remove the screws on the right side of the AG1 housing.
3.
Affix the barcode reader using the screw included in delivery with the barcode reader holder.
4.
Use a hex key to put the first screw (with lock washer and sealing washer) through the drilled
hole on the right side of the AG1 housing.
5.
Press the scanner holder against the housing from the outside. Fasten the screw using a torque
of 6 Nm.
6.
Use the hex key to put the second screw (with lock washer and sealing washer) through the
drilled hole on the right side of the AG1 housing. Fasten the screw using a torque of 6 Nm.
The scanner holder is now attached to the housing.