Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
79
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
Iss
u
e d
a
te
: 21
.1
0.2
011
AS-Interface
Operation in advanced display mode
9.5.1
CHIPCARD
Main Menu|| SETUP ||
CHIPCARD
||
This function is used to send unsafe AS-i data between the master and chip card.
In addition, the unsafe section of the chip card can be deleted.
For additional information refer to Chip card.
9.5.2
Language (menu language)
Main Menu || SETUP ||
LANGUAGE
||
From this menu you can select the menu language. „X“ marks the currently selec-
ted language.
9.5.3
FACTORY RESET (factory default settings)
Main Menu || SETUP || FACTORY RESET ||
This function can be used to reset the master to the factory default settings. The
“Reset” is done by selecting menu point DO RESET.
CHIPCARD
CARD -> MONITOR
MONITOR -> CARD
CLEAR CHIPCARD
CHIPCARD->MONITOR: Chip card data are copied to the Monitor
MONITOR->CHIPCARD: Monitor data are copied to the chip card
CLEAR CHIPCARD: Chip card data are cleared
LANGUAGE
ENGLISH X
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
FACTORY RESET
DO RESET
Warning!
This function should only be used in emergency cases, since all previously made set-
tings are restored to the factory defaults, so that errorless communication and function
of the Monitor with the AS-i circuit can no longer be assured.
