Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
59
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
Iss
u
e d
a
te
: 21
.1
0.2
011
AS-Interface
Operation in advanced display mode
9.3.1.2
SINGLE SLAVE
Main Menü || AS-I SAFETY || TEACH CODES ||
SINGLE SLAVE
||
This menu point allows you to teach the code table for a safe slave. Proceed as
follows:
•
Use the arrow keys to navigate to the third line (0000) on the display
•
Enter the PIN there
•
Use the arrow keys to navigate to the fourth line (OK) on the display
•
Confirm your entries with OK
In the following menu:
•
Use the arrow keys to select the AS-i circuit (1/2)
•
Confirm with OK
After selecting the AS-i circuit the safe unit switches to configuration mode.
In the following menu:
•
Use the arrow keys to navigate to the second line (– –1) on the display
START MONITOR?
OK
Information!
See also Procedure for configuring and teaching code sequences.
TEACH CODES
ENTER PIN
0000
OK
AS-i CIRCUIT 1
AS-i CIRCUIT 2
TEACH CODES
SLAVE ADDR.
––1
ESC
OK
...
HELP
⇓
