|
E
LECTRICAL
C
ONNECTIONS
16
3.7
Analog Output (X4)
A 16-bit analog output is available at terminal X4.
This output can be configured and scaled in the ANALOG MENU.
The following configuration is possible:
Voltage output:
-10 V … +10 V
Current output:
0 mA … 20 mA
Current output:
4 mA … 20 mA
The analog output is proportional to the measurement result and refers to AGND
potential.
AGND and device GND are connected internally.
CAUTION!
Parallel operation of voltage and current output is not permitted!
3.8
Serial Interface (X3)
A serial interface (RS232 or RS485) is available at terminal X3.
This interface can be configured in the SERIAL MENU.
The RS232 or RS485 interface can be used as follows:
For parameterization of the device during commissioning
For changing parameters during operation
For reading out actual values via PLC or PC
Connection of the RS232 interface:
Содержание K23-SSI/Rx/IU-C
