Pepperl+Fuchs IC-KP2-2HB6-V15B Скачать руководство пользователя

Страница: 30 / 88

13-

IC-KP2-2HB6-V15B

Commands

7.2

General information on PROFIBUS DP

The PROFIBUS DP is a standardized, open fieldbus, which enables data

exchange between PLCs, PCs, operating and observation devices, and also

sensors and actuators.
For more detailed information on the PROFIBUS DP, refer to the PROFIBUS

standard EN 50170 and to the current literature on the subject (e.g. M. Popp,

“

The

New Rapid Way to PROFIBUS DP

”

available (in German) from the PROFIBUS

user organization).

7.2.1

PROFIBUS DP features

The following is a list of the most important performance features of PROFIBUS

DP:

■

DP slave functionality with functions Data_Exchange, RD_Inp, RD_Outp,

Slave_Diag, Set_Prm, Chk_Cfg, Get_Cfg, Global_Control,

Set_Slave_Address.

■

Modular DP slave device with one module each for writing and reading

data.

■

Transfer rates of 9.6 kbit/s, 19.2 kbit/s, 93.75 kbit/s, 187.5 kbit/s, 500 kbit/s,

1.5 Mbit/s, 3 Mbit/s, 6 Mbit/s and 12 Mbit/s auto-synchronizing.

■

Adjustable device address 00h

…

7Eh.

7.2.2

PROFIBUS DP communication parameters (GSD file)

The communication parameters for the IDENTControl Compact can be taken from

the GSD file.
The GSD file name for IDENTControl Compact IC-KP2-*HB6-V15B is:

P&F_0B65.gsd.

Configuring the bus master for PROFIBUS DP operations

If you have a configuration tool, read in the GSD file with the configuration tool.

Provide information for the device address and the size of the input and output

data fields at the same time.

The bus master is configured.

Note!

The PROFIBUS User Organization e.V. Haid- and Neu-Str. (PNO) publishes
informational brochures and a PROFIBUS product catalog
(www.PROFIBUS.com).

Содержание IC-KP2-2HB6-V15B

























































































Результаты поиска

Содержание IC-KP2-2HB6-V15B

Отзывы:

Похожие инструкции для IC-KP2-2HB6-V15B

Бренды по названию

Популярные бренды

Pepperl+Fuchs IC-KP2-2HB6-V15B, Руководство пользователя

Результаты поиска

Содержание IC-KP2-2HB6-V15B

Отзывы:

Похожие инструкции для IC-KP2-2HB6-V15B

Бренды по названию

Популярные бренды