H D 2 - D M - A / D M - A M
Application Engineering HD2-DM-A
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
37
187630
•
Figure 5.21: Fieldbus Diagnostic Server Parameter window
10. Enter the appropriate values of the PC on which the FDS is run-
ning (see chapter 7.4). If FDS is running on the same PC as the
Diagnostic Manager, choose
local
•
Figure 5.22: Settings when FDS is running on the same PC
#
Perform Topology Scan
1.
Right-click on the
FieldConnex Diagnostic Server
(FDS) in
your project and select
Connect
2.
Right-click on FDS in your project and select
Additional
functions/Topology Scan
A list with all COM Ports FDS are connected to is shown.
3.
Select the COM Ports you want to add to the project
4.
Restrict the Diagnostic modules address range to speed up scan-
ning
•
