Port Forwarding Settings
Enable
This setting specifies whether the inbound service takes effect. When
Enable
is checked,
the inbound service takes effect: traffic is matched and actions are taken by the Pepwave
router based on the other parameters of the rule. When this setting is disabled, the
inbound service does not take effect: the Pepwave router disregards the other parameters
of the rule.
Service
Name
This setting identifies the service to the system administrator. Valid values for this setting
consist of only alphanumeric and underscore “_” characters.
IP Protocol
The
IP Protocol
setting, along with the
Port
setting, specifies the protocol of the service
as TCP, UDP, ICMP, or IP. Traffic that is received by the Pepwave router via the specified
protocol at the specified port(s) is forwarded to the LAN hosts specified by the
Servers
setting. Please see below for details on the
Port
and
Servers
settings. Alternatively, the
Protocol Selection Tool
drop-down menu can be used to automatically fill in the
protocol and a single port number of common Internet services (e.g. HTTP, HTTPS, etc.).
After selecting an item from the
Protocol Selection Tool
drop-down menu, the protocol
and port number remain manually modifiable.
Port
The
Port
setting specifies the port(s) that correspond to the service, and can be
configured to behave in one of the following manners:
Any Port
,
Single Port
,
Port Range
,
Port Map
,
and
Range Mapping
Any Port
: all traffic that is received by the Pepwave router via the specified protocol is
forwarded to the servers specified by the
Servers
setting. For example, with
IP Protocol
set to
TCP
, and
Port
set to
Any Port
, all TCP traffic is forwarded to the configured servers.
Single Port
: traffic that is received by the Pepwave router via the specified protocol at the
specified port is forwarded via the same port to the servers specified by the
Servers
Содержание Pepwave DCS-RUG
Страница 53: ......
Страница 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
