setting. For example, with
IP Protocol
set to
TCP
, and
Port
set to
Single Port
and
Service Port
80, TCP traffic received on port 80 is forwarded to the configured servers
via port 80.
Port Range
: traffic that is received by the Pepwave router via the specified protocol at the
specified port range is forwarded via the same respective ports to the LAN hosts specified
by the
Servers
setting. For example, with
IP Protocol
set to
TCP
, and
Port
set to
Port
Range
and
Service Ports
80-88, TCP traffic received on ports 80 through 88 is forwarded
to the configured servers via the respective ports.
Port Mapping
: traffic that is received by Pepwave router via the specified protocol at the
specified port is forwarded via a different port to the servers specified by the
Servers
setting. For example, with
IP Protocol
set to
TCP
, and
Port
set to
Port Mapping
,
Service
Port
80, and
Map to Port
88, TCP traffic on port 80 is forwarded to the configured
servers via port 88.
(Please see below for details on the
Servers
setting.)
Range Mapping
: traffic that is received by the Pepwave router via the specified protocol
at the specified port range is forwarded via a different port to the servers specified by the
Servers
setting.
Inbound IP
Address(es)
This setting specifies the WAN connections and Internet IP address(es) from which the
service can be accessed.
Server IP
Address
This setting specifies the LAN IP address of the server that handles the requests for the
service.
9 NAT Mappings
NAT mappings allow IP address mapping of all inbound and outbound NAT traffic to
and from an internal client IP address. Settings to configure NAT mappings are
located at
Advanced>NAT Mappings
.
To add a rule for NAT mappings, click
Add NAT Rule.
Содержание Pepwave DCS-RUG
Страница 53: ......
Страница 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
