peplink Pepwave DCS-RUG, Руководство пользователя

Страница: 13 / 57

Channel
Selection
Determine whether the channel will be automatically selected. If you select custom, the
following table will appear:
Data Rate This option allows you to select a specific bit rate for data transfer over the device’s Wi-Fi
network. By default, Auto is selected.
Output Power This option is for specifying the transmission output power for the Wi-Fi AP. There are 4
relative power levels available – Max, High, Mid, and Low. The actual output power will
be bound by the regulatory limits of the selected country. Note that selecting the Boost
option may cause the MAX’s radio output to exceed local regulatory limits.
Roaming Checking this box will enable Wi-Fi roaming. Click the icon for additional options.
Connect to Any
Open Mode AP This option is to specify whether the Wi-Fi WAN will connect to any open mode access
points it finds.
Beacon Miss
Counter
This field allows you to set the frequency for the beacon to include delivery traffic
indication messages.
Bandwidth Allowance Monitor
Action
If
​
Error! Reference source not found.
​
is enabled, you will be notified by
email when usage hits 75% and 95% of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this WAN
connection will be disconnected automatically when the usage hits the monthly
allowance. It will not resume connection unless this option has been turned off or the
usage has been reset when a new billing cycle starts.
Start Day This option allows you to define which day of the month each billing cycle begins.
Monthly
Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.