Per FCC regulations, the country selection is not available on all models marketed
in the US. All US models are fixed to US channels only.
Wi-Fi AP Settings
Protocol
This option allows you to specify which client association requests will be
accepted. By default,
802.11ng
is selected.
Channel Width
Auto (20/40 MHz)
and
20 MHz
are available. The default setting is
Auto (20/40
MHz),
which allows both widths to be used simultaneously.
Auto (80 MHz)
and
(20/40 MHz)
are available. The default setting is
80 MHz
.
The two default settings are for 802.11ng and 802.11ac accordingly?
Channel
This option allows you to select which 802.11 RF channel will be used.
Output Power
This option is for specifying the transmission output power for the Wi-Fi AP. There
are 4 relative power levels available –
Max
,
High
,
Mid
, and
Low
. The actual output
power will be bound by the regulatory limits of the selected country.
Maximum number
of clients
Enter the maximum number of clients that can simultaneously connect to the
wireless network or enter 0 to allow an unlimited number of connections.
Client Signal
Strength
Threshold
A
This field determines that maximum signal strength each individual client will
receive. The measurement unit is megawatts.
Beacon Rate
A
This option is for setting the transmit bit rate for sending a beacon. By default,
1Mbps
is selected.
Beacon Interval
A
This option is for setting the time interval between each beacon. By default,
100ms
is selected.
DTIM
A
This field allows you to set the frequency for the beacon to include a delivery traffic
indication message. The interval is measured in milliseconds. The default value is
set to
1 ms
.
RTS Threshold
Set the minimum packet size for your access point to send an RTS using the
RTS/CTS handshake. Setting 0 disables this feature.
Fragmentation
Threshold
A
Determines the maximum size (in bytes) that each packet fragment will be broken
down into. Set 0 to disable fragmentation.
Содержание Pepwave DCS-RUG
Страница 53: ......
Страница 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
