peplink Pepwave DCS-RUG, Руководство пользователя

Страница: 33 / 57

SSL Encryption Check the box to enable SMTPS. When the box is checked,
​
SMTP Port
​
will be
changed to
​
465
​
automatically.
SMTP Port This field is for specifying the SMTP port number. By default, this is set to
​
25
​
; when
SSL Encryption
​
is checked, the default port number will be set to
​
465
​
. You may
customize the port number by editing this field. Click
​
Default
​
to restore the number
to its default setting.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending email. These
options are shown only if
​
Require authentication
​
is checked in the
​
SMTP Server
setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address the Pepwave router will use to send reports.
Recipient’s
Email Address
This setting specifies the email address(es) to which the Pepwave router will send
email notifications. For multiple recipients, separate each email addresses using the
enter key.
After you have finished setting up email notifications, you can click the
​
Test Email
Notification
​
button to test the settings before saving. After
​
Test Email Notification
is clicked, you will see this screen to confirm the settings:
Click
​
Send Test Notification
​
to confirm. In a few seconds, you will see a message
with detailed test results.