18
Installation and User’s Guide
HEAT PUMP CONTROL PANEL OVERVIEW
CONTROL PANEL LAYOUT
1.
ON/OFF
button – Turns the heat pump On and Off.
2.
MENU SELECT
button – If pressed from the Run Screen it will bring up the Menu Select Menu Tree
Screens. It is also used to scroll through the Operator Setup Menu Tree.
3.
POOL/SPA
button – On the first press the current heat, cool or auto mode will be displayed along with the
active set point, pool or spa. On subsequent presses, the use of the pool or spa set points will be toggled.
The operator can also toggle between the pool and spa set point by using the UP and DOWN arrows.
4.
UP and DOWN Arrow
buttons – The UP and DOWN arrows will raise or lower the temperature set point
if pressed while the run screen is displayed. They are also used to scroll through the various parameter values
on the Menu Select and Operator Setup screens.
5.
Liquid Crystal Display
(
LCD
) – Displays water temperature, set point temperature and heat pump
parameters.
6.
ON Light
– Illuminated green when the heat pump is on.
7.
SERVICE Light
– Illuminated red when an alarm condition exists.
Figure 17.
Heat Pump Main Control Panel
Содержание ThermalFLo HP
Страница 54: ...46 Installation and User s Guide SAVE THESE INSTRUCTIONS...
Страница 55: ...47 Installation and User s Guide NOTES...
Страница 56: ...P N 474099 Rev C 08 02 10 474099...