background image

1/3 HP Submersible Sump Pump 

with Vertical Float Switch

Item 68476 Specifications

Float Switch Operation Height

7.1 IN. ON / 2.8 IN. OFF

Electrical Requirements

120V~ / 60Hz / 7.6A

Power Cord Length

10 FT.

Maximum Capacity

3000 GPH

Maximum Delivery Height

25 FT.

Discharge Size

1.5 IN. NPT 

(includes 1.25 IN. Adaptor)

Maximum Water Temperature

77° F (25°C)

252728

Read the separate Sump Pump Safety Warnings, 

Installation and Operation Instructions before 

using this product. 

Failure to do so can result in serious injury. 

SAVE THIS SPECIFICATION SHEET AND 

THE SUMP PUMP SAFETY WARNINGS, 

INSTALLATION AND OPERATION 

INSTRUCTIONS FOR FUTURE REFERENCE.

When unpacking, make sure that the product is intact and undamaged.  

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

Copyright

©

 2011 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork contained herein may be reproduced in any shape 

or form without the express written consent of Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  Tools required for assembly and service may not be included.

Summary of Contents for PACIFIC HYDROSTAR 1/3 HP Submersible Sump Pump with Vertical Float...










Reviews: