OUT 1
OUT 2
COMM. SPEED 1 SPEED 2 SPEED 3 SPEED 4
BUS
IN 1
IN 2
OUT 3
N
L
230 V ~
OUT 1
OUT 2
COMM. SPEED 1 SPEED 2 SPEED 3 SPEED 4
BUS
IN 1
IN 2
OUT 3
N
L
230 V ~
1 - Connect the cables in accordance with the diagram.
2 - Start the secured
Install menu
(from the main menu, simultaneously hold down
Esc
and
Valid
for 3 secs. A star appears
in the top right corner of the home screen).
3 - On the
Inlets / E1-E2
sub-menu (in accordance with chosen terminal), select
COVER CONTACT
to indicate that a limit
contact has been connected to the corresponding inlet
.
4 - On the
Filtration Length / Cover Open
sub-menu, select
YES
so that filtration is carried out while the cover is open (the
cover does not cover the pool). This is the primary function of the
Filtration Length / Start
setting (despite the setting of an
hour from the start and/or end of filtration, if the cover does not cover the pool all day, filtration will run all day).
5 - On the
Filtration Speed / Events / Cover Open
sub-menu, select
YES
so that the filtration speed changes from S1 to S2.
Inlet: connection for the end of a cover line
The contact is closed when the cover is covering the pool
1 - Connect the cables in accordance with the diagram.
2 - Start the secured
Install menu
(from the main menu, simultaneously hold down
Esc
and
Valid
for 3 secs. A star appears
in the top right corner of the home screen).
3 - On the
Inlets / E1-E2
sub-menu (in accordance with chosen terminal), select
OTHER
to indicate that a dry contact has been
connected to the corresponding inlet
.
Inlet: connection for a switch, a remote control...
Inlet:
connection for an air temperature probe (see p06)
It is possible to connect any type of dry contact inlet (switch, remote control, relay) which activates an
outlet.
18
Содержание SPEEDEO SB-PF-SPO-003C
Страница 31: ......
