Pentair Siata V132 SFE Скачать руководство пользователя | Manualshive

Страница: 7 / 88

background image

Installer manual Siata V132 - SFE - Generalities

Ref. MKT-IM-003 / B - 19.04.2017

7 / 88

1.7.

Procedure for technical support

Procedure to follow for any technical support request:

A

Collect the required information for a technical assistance request.
→ Product identification (see 2.2. Safety tags location, page 8 and 9.1 . Recommendations,
page 57);
→ Problem description of the device.

B

Please refer to the "Troubleshooting" chapter, page 74. If the problem persists contact your
supplier.

1.8. Copyright

© 2017 Pentair International Sàrl All rights reserved.

1.9.

Limitation of liability

Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer
warranty that may be invoked by Pentair’s direct customers. Users should contact the vendor of this

product for applicable conditions and in case of a potential warranty claim.

Any warranty provided by Pentair regarding the product will become invalid in case of:
•

Improper installation, improper programming, improper use, improper operation and/or
maintenance leading to any kind of product damages;

•

Improper or unauthorized intervention on the controller or components;

•

Incorrect, improper or wrong connection/assembly of systems or products with this product and
vice versa;

•

Use of a non-compatible lubricant, grease or chemicals of any type and not listed by the
manufacturer as compatible for the product;

•

Failure due to wrong configuration and/or sizing.

Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair
products, as well as for process/production processes which are installed and connected around or
even related to the installation. Disturbances, failures, direct or indirect damages that are caused by
such equipment or processes are also excluded from the warranty. Pentair shall not accept any
liability for any loss or damage of profits, revenues, use, production, or contracts, or for any indirect,
special or consequential loss or damage whatsoever. Please refer to the Pentair List Price to know

more about terms and conditions applicable to this product.

«
...
5
6
7
8
9
...
»

Содержание Siata V132 SFE

























































































Отзывы:

Нет отзывов

Похожие инструкции для Siata V132 SFE

Бренд: ABB Страницы: 370

Бренд: ABB Страницы: 17

Бренд: ABB Страницы: 104

Бренд: ABB Страницы: 120

Бренд: ABB Страницы: 42

Бренд: Panasonic Страницы: 31

Бренд: Panasonic Страницы: 31

Бренд: Panasonic Страницы: 26

Бренд: NAiS Страницы: 199

Бренд: Panasonic Страницы: 38

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 179

Бренд: Panasonic Страницы: 23

Бренд: Panasonic Страницы: 30

Бренд: Panasonic Страницы: 26

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды