Pentair Pool and Spa Control System SunTouch Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 88

background image

1

SunTouch Pool and Spa Control System Installation and User’s Guide

Section 1

SunTouch

™

System Overview

SunTouch Control System Overview

Welcome to the Pentair SunTouch pool and spa control system - The next generation in intelligent control
systems. The SunTouch control system can be easily configured to operate in “Solar Only” mode for solar
systems, or in “Pool/Spa” mode for shared equipment systems, or single body pool or spa systems. The
SunTouch system is also compatible with the IntelliChlor

®

salt chlorine generator for pool water sanitizing, and

with the IntelliFlo

®

4x160 variable speed pump. For a complete list of SunTouch systems and optional

equipment see to page 38.

SunTouch Solar Mode

The SunTouch Solar system offers automatic solar heating control using a differential temperature control
designed especially for solar-heated swimming pool, spas, and hot tubs. Whenever solar energy is available,
SunTouch will automatically activate a motorized three-port solar valve and/or the optional solar booster pump
which controls the water flow direction, and pump pool water through the solar collectors.

The filter pump

timer can be set so the filter pump is operating during that time of the day when solar energy is available.

If you are using a pool cleaner booster pump for your pool, SunTouch will disable the pump for five minutes
whenever the solar system turns on. This protects the pump from possible damage caused by residual air
within the solar panels.

Note:

For information about setting up and operating SunTouch as a solar only system, see page 4.

SunTouch Pool/Spa Mode

SunTouch Pool/Spa mode provides automation controls for pool and spa shared equipment systems, or for pool
only or spa only (single body) systems. With the addition of two valve actuators, SunTouch can be configured
to control your pool and spa heating and filtration schedules and additional features such as pool lights,
automatic cleaners, or waterfalls.

Using the optional QuickTouch

®

(QT4) wireless remote controller you can control up to four circuits to

activate the spa circulation, and for operating three auxiliary pieces of equipment (such as lights, jet pump, air
blower, waterfall, etc.). For more information, see “Main Menu: QuickTouch (QT4) Wireless Remote,” on
page 28.

Note:

For information about setting up and operating SunTouch as a standard pool and spa controller

in “Pool/Spa” mode, see page 9.

SunTouch Power Center

«
...
7
8
9
10
11
...
»

Содержание Pool and Spa Control System SunTouch

























































































Отзывы:

Нет отзывов

Похожие инструкции для Pool and Spa Control System SunTouch

Бренд: Zolix Instruments Страницы: 22

Бренд: easydriver Страницы: 26

Бренд: Calsense Страницы: 10

Бренд: Yardney Страницы: 8

Бренд: H3C Страницы: 5

Бренд: H3C Страницы: 4

Бренд: Eaton Страницы: 2

Бренд: Panamax Страницы: 16

Бренд: Carel Страницы: 48

Controller CR100

Бренд: Sonos Страницы: 12

Turbo-V 250 series

Бренд: Varian Страницы: 79

Бренд: M-system Страницы: 7

Бренд: Yoshitake Страницы: 21

Бренд: Oasis Страницы: 7

Бренд: Hanma Страницы: 3

Бренд: ICP DAS USA Страницы: 6

Бренд: IEI Technology Страницы: 14

Бренд: HBM Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды