background image

34

SunTouch Pool and Spa Control System Installation and User’s Guide

High/Low Temperature Circuit Control (Single Body System)

HI-TEMP / LO-TEMP Circuit Control

Use 

HI-TEMP

 

button

 to switch on the heater and filter pump

for high temperature control. To activate the heater when this
button is pressed, first select the heat source in the “Heat 2/13”
menu (page 14). To manually switch on or off the heater, use
“Manual Heat” in the “Heat 2/13” menu. The HIGH circuit
can be programmed to switch on and off at a specific time (see
“Schedules” page 17). Freeze protection (see page 26) can also
be assigned to the HIGH circuit. The heat temperature settings
are displayed on the main screen.

LOW Temperature  control  circuit: 

 The HI-TEMP (UP arrow button) can be assigned as a low temperature

control button. Use the LOW temperature circuit to switch on the heater (when heater is enabled) and filter
pump. To activate the heater when this circuit is enabled, first select the heat source in the “Heat 2/13” menu
(page 14). To manually switch on or off the heater, use “Manual Heat” in the “Heat 2/13” menu. The LOW
circuit can be programmed to switch on and off at a specific time (see “Schedules” page 17). Freeze
protection (see page 26) can also be assigned to the LOW circuit. The heat temperature settings are displayed
on the main screen. For more information, see the SunTouch main menu on page 35.

SunTouch Single Body System Notes

The “SPILLWAY” circuit selection in the “Circ.Functions” menu has no function.

When using a 2-Speed relay, AUX 3 is assigned to the “HIGH” circuit.

Setting up SunTouch to operate as a Single Body system

To setup SunTouch as a “Single Body” of water system (pool only or spa only):

Menu button: 

Select the Advanced menu (8/13).

Right button: 

Select the System Type setting.

Up/Down button: 

Select Single Body to configure SunTouch as a single body of

water system.

Left button: 

Press the Left button to return to the main status screen.

System Type
Single Body

Main Menu      8/13
       Advanced

  

HIGH     75°F / 85°F

   11:51AM    HEATER

Содержание Pool and Spa Control System SunTouch

























































































Отзывы: